Garbage Disposal Not Working: A Step By Step Checklist

When you discover your garbage disposal not working, this step-by-step checklist can serve as a troubleshooting guide. My definition of “garbage disposal not working” means that when you turn on the switch, the unit is not running (or operates) and there is no humming sound. We need to understand that even if you have the best garbage disposal on the market, you are bound to encounter some problems in usage.

For such cases when your home unit cannot be turned on and no humming sound coming from the motor, one of the obvious causes might be an electrical problem. Just follow the step by step checklist outline below to fix the problems.Plumbing services – garbage disposal service

Step 1: First, check to ensure that the power cord of your disposal is plugged in. Confirm that the disposal is not working again before you proceed to the next step.

Step 2: Locate the reset button which should be at the bottom or the side of the unit and press it to reset. (Note: When you see the reset button sticking out, it means the unit has tripped. You need to push the button inwards to reset the disposal.)

Step 3:I f the garbage disposal is still unable to start, the next step is to check whether the circuit breaker in the electrical service panel has tripped or turned off. When the circuit breaker trips again after resetting, it means that there is a current overload or a short circuit on the circuitry. If you are in this scenario and don’t have any electrical background or circuit breaker troubleshooting skills, it’s best to consult a technician to rectify the fault.

Step 4: When everything is in order and the garbage disposal not working, the next move is to check the power switch which is located on the wall or under the sink. Turn off the circuit breaker and unplug the power cord. Open the unit switch housing to check for any loose wiring or broken wire.

If the switch is faulty, replace it with a new one. Before turning back the power to the unit, we are going to do 1 more extra step by checking the wire termination to the unit. The connection to the motor is at the base of the unit.

Remove a small cover at the bottom of the garbage disposal to access the wire connection. Check for any loose connections or broken wires. If everything is in order, put back the cover.

Step 5: Turn on the circuit breaker and switch on power to the garbage disposal. By this stage, if the disposal still does not turn on, the final step is to use a voltage meter to measure the voltage across the switch box terminal. If you are unsure about this step, consult someone with electrical background or a technician.

Step 6: If the required voltage is present, we can conclude that you need to repair the unit or get a new replacement.

We hope that the above step by step checklist to troubleshoot garbage disposal is useful, especially when you find your garbage disposal not working.

This Blog was posted by Chambliss Plumbing in San Antonio, Texas

Soccer Field Lighting – Fixtures and Photometric Designs

Soccer Field Lighting – Fixtures and Photometric Designs

Because the standard unit of measurement in any outdoor lighting design is the foot-candle, government regulations normally specify foot-candle minimum requirements for parking lot lighting, and security lighting, and athletic field lighting. One sport that warrants particular attention to foot-candle lighting levels is soccer. Because soccer fields have sprung up all over the country with the rising popularity of the game, it is common to find them widely varied in size and function. To effectively light a soccer field, a professional designer or DYI certified electrical installer has to take certain critical factors into consideration before purchasing soccer field lights, mounts, and poles. Sometimes even a professional designer has to consult with an electrician who is familiar with local municipal outdoor lighting codes, and sometimes a DYI in spite of local expertise has to call the US Soccer foundation for recommendations on which soccer field lighting equipment will give a given location optimal foot candle spread with minimal glare and strict regulation of light pollution.electricians san antonio

To save a step for the contractor and to reduce the margin of error for the DIY installer, our company streamlines this information into a consolidated set of expert tools and consultation services offered for free through our online forum and complimentary over the phone to serious inquirers and clients. We also inventory a complete selection of soccer field lights, equipment, and mounting accessories to optimize game visibility for players and to maintain your facility in good standing with governing compliance standards. Because so many games are played at night, player safety is foremost in consideration when developing a soccer field lighting system. To produce clear visibility without blinding glare, lighting experts must mathematically determine the precise level of foot-candles needed for the size of a particular field. They must also take into account whether or not spectators will be watching the game, as this constitutes a second layer of light that must be evenly spread over the field.

One foot-candle is equal to one lumen of light spread evenly over a space of one square foot. Special equipment is required to measure foot-candle levels, and normally only professional electricians have access to this equipment. This is one area where neither DIY electricians nor outdoor lighting designers relatively new to sports lighting ever want to cut corners. Municipal codes are strict in almost every part of the country, and dark sky laws now extend from coast to coast requiring athletic field lighting be kept on the field and out of neighboring homes and businesses. By taking the time to ensure your proposed system meets all legal requirements and fulfills the recommendations of the US Soccer Foundation, you can provide your client or your own organization with an insulating factor against liabilities that could result from injuries on an improperly lighted soccer field.

Light levels on soccer fields will vary greatly depending on field size, status as a practice field or game field, and the number of spectators viewing the game. Here is where can offer such a powerful competitive advantage when it comes to determining just what should go into a system. By doing the calculations for our clients, we help even the most advanced mathematicians double-check their work, and we help DYI installers with limited time and resources save a step.

Voltage also factors heavily into determining which soccer field lights will produce the ideal, glare-free visibility on the field. sports lights are regulated with sophisticated magnetic transformers that control voltage levels and produce superior electron flow. Our specialists will help you assess the needs of the field and choose from a range of multi-tap ballasts ranging from 120, 208, 240, and 277 volts. Contractors installing lights in professional soccer stadiums can also obtain 480-volt ballasts for game and spectator lighting. Stadiums of this size normally require as much as 75 foot-candles of continuous, horizontal target illumination, compared to the mere 30 foot-candles required by a local municipal or schoolyard practice field.

If you are a contractor, working with a vendor like our company who can supply you with lights for either scenario gives you a strong competitive advantage over other firms who may only have access to fixtures appropriate for a certain sized field only.

Regardless of your level of expertise, it is always a good idea to call a specialist to ensure your voltage calculations have correctly matched your lamp type to your ballast. Incorrect estimates can create hazards and consume more power than necessary. However, when properly ballasted and fitted on the correctly sized poles, soccer field lights will produce a more efficient light than cheaper, competing equivalents. Advanced reflector arrays help the metal halide lamps within the fixtures spread the light more evenly across the field and simultaneously prevent excess spill light from creating light pollution and glare. This makes the game more enjoyable to watch, safer to play and eliminates complaints from neighboring businesses and homeowners.

In keeping with recommendations made by the US Soccer Foundation, we recommend you use galvanized steel poles to mount your soccer field lights. These poles are more resistant to strong winds and will last longer, protecting investment dollars from replacement costs. To help contractors and DYI installers place their lighting fixtures at the precise, necessary height, stocks a full repertoire of mounting assemblies to accommodate effective illumination of any size field from the recommended distances from sidelines and fences.

Our specialists will help both professionals and end-users research regulatory codes, make all necessary calculations to determine optimal lighting levels, and supply all fixtures, poles, mounts, and accessories needed to fully light a soccer field of any size, anywhere in the United States.

When it comes to choosing a certified Residential Electrician don’t let the following three letters on a business card fool you, “Lic.” Yes, knowing your electrical contractor is licensed is important but if that was all you needed to know when hiring an electrician you would not be reading this right now.

I know it is not an easy task finding the right electrician or any other type of contractor for that manner. I recently was in your position, looking for a qualified electrician, and I needed one fast! Imagine this you’re sitting on your couch relaxing after a long week at work, it’s Saturday and sunny and everything is going great. You fall asleep, one of those great afternoon “cat naps,” you know the ones you don’t get near enough of, then it happens!

You go from peacefully sleeping to jumping straight up, running through a now dark house to find the cause of that massive explosion. Lighting, it’s a storm, it must have hit the house. You breathe a sigh of relief as you head to the breaker box knowing the house has not been directly hit. After flipping the breaker back on you assume you can return to your peaceful Saturday afternoon.

This Blog was post by Good Electric – Electrician San Antonio